Power Bike

The extra power of E-bikes asks for extra strong parts. E-bike rims like the 545d are single eyeletted and feature a wide, reinforced profile. This ensures they are long lasting and perfectly compatible with higher volume tires.

The DT Swiss 533d is a competitively priced Enduro rim made to accommodate tyres up to 2.5 inches.
- This Enduro rim is made to cope with whatever you want to throw at it, but is also light enough to make sure you aren't expending any unnecessary energy on the climbs.
- The pin joint joining process, consisting of two steel inserts being form-fit pressed into the rim profile achieves a strong & precise rim profile.
- Disc brake specific.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

A torque arms purpose is to prevent the motor from spinning within the dropouts of your bike.

If you have an electric bike rated at more than 350 watts we recommend you use a torque arm(s) to avoid damaging or even destroying your fork or frame, not to mention causing an accident.

This torque arm is appropriate for front and rear motor applications and suitable up to 2000 watts systems.

For extra protection use 2 - one for each side of the motor.

A torque arms purpose is to prevent the motor from spinning within the dropouts of your bike.

If you have an electric bike rated at more than 350 watts we recommend you use a torque arm(s) to avoid damaging or even destroying your fork or frame, not to mention causing an accident.

This torque arm is appropriate for front and rear motor applications and suitable up to 2000 watts systems.

For extra protection use 2 - one for each side of the motor.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Convert a conventional bicycle into an e-bike using the POWER BIKE retrofitting kit, consisting of a rear wheel drive, battery, and PowerGrip. Choose between 32 km/h (ROAD LEGAL) or 50 km/h (OFF-ROAD). Batteries are available with capacities up to 1050 Wh, giving you a range of more than 140 km – and plenty of fun.

Tektro Hydraulic e-Brakes with Electric Cut Off

New Tektro HD-E350 hydraulic disc brake for e-bikes, made by renowned brake specialist Tektro.

Display Type LCD

Nominal Voltage 24/36/48 V

Communication UART ( compatible with all Power Bike kits)

Support Modes 0-5